"Hi, I've connected my bluetooth module directly to the Ardupilot telemetry port RX to TX, TX to RX, etc... and also I've set the baud rate of the telemetry port and bluetooth module to 57Kbps.
I've selected Mavlink protocol and the correct bluetooth…"
"Hi, would you be able to add bluetooth connection support: My Android Galaxy S Duos phone doesn't work with OTG and bluetooth should be great to bridge the connection between Xbee and the phone. Thanks!"
I've tested the OSD today but could not make a video due to my DVR did not arrive yet. My review:
- Great firmware. The best I've ever used;
- Amps. Bat%, Climb rate, etc... everything worked perfectly;
- Stall message kept appearing all…"
"Hi Gabor, great improvements. I've loaded 2.7 version and will fly tomorrow to try. I'll let you know the results.
One thing I've tested and did not work was the turn on/off function. Changing manual/stabilize modes between 1s and 1.5s just turned o…"
"I like the idea of connecting via bluetooth. This way you can leave the modem in your pocket and see the telemetry in your iPad without cables going around.
Is there already some beta software for jailbroken iPad, so we can start testing?
"Hi Colin, this is a great initiative. Ii currently use the standard Ardustation and it works great for quick telemetry and antenna tracking. This will be a great step forward to improve the product.
I appreciate you sharing your project, but just be…"
"Hi Sandro, got my minimosd and it is very nice. I've tested it and it is working perfectly. The only thing you need to fix is the drawing in the google repository that's showing the video in and out inversed.
"Hi Jhon, as my previous post, this osd do not calculate any voltage. It get all information directly via mavlink from APM, so the voltage calculation is processed by APM. This is a board to just get mavlink data and display in an osd format."
Could you please let us know which software did you use to join the images and how you georeferenced them?
If possible, could you please recommend some software that I can use to do the same as you did?
"What rz_ten described above is exactly the same issue I've reported on page 17 and no one replied. After a couple of seconds flying I need to hold my stick on bottom right for my copter to keep position. After landing and start flying again the proc…"