I'm a newbie and I just wondered if anyone could explain to me how the flight modes in Mission Planner relate to the functionality of the Quanum Nova. There are 8 modes listed I believe and they don't correspond to the mode switch settings of the Quanum Nova transmitter. The TX has 5 modes controlled by 2 switches. I haven't seen a logic table that shows me how the assignment of the modes relates to the mode switches on my TX.
Am I even asking the right question?
Replies
I have changed one of mine to Auto Mode for Mission Planner
What is the definition of Auto Mission Mode? Is that the mode to fly the waypoints set in Mission Planner? Since there are six possible switch selections and six modes in Mission Planner would it be possible to just add a mode rather than change one? And which flight mode do you set in Mission Planner to get into Auto Mission Mode on the Quadcopter. I have attached a screenshot of how my flight modes are currently set in Mission Planner.
Thanks
Flight Modes in Mission Planner.JPG
Yes auto is for mission planner, you could I just followed the already tested setup.
Some of the other modes I knew I would never use.
http://diydrones.com/profiles/blogs/adding-3dr-radio-telemetry-to-t...
https://github.com/jlnaudin/x-VTOLdrone/wiki/TEST-FLIGHT:-Full-auto...(Quanum-NOVA)
Good information. Thanks.