Fixed my pdb problem and everything, all the motors arm and run all right at the exception of motor 1.

Motor 1 seems too be at least 20% slower than the other 3.

I have re calibrated manually and automatically 3 or 4 times. 

This is absurd.

Views: 173

Reply to This

Replies to This Discussion

On some motors, the shaft sticks out the bottom by a mm or so.  Check that it's not binding on the motor mount.

I can also confirm that this is not the issue sadly

I can confirm that the APM is realizing the quad is not stabilized, though it doesn't look like its making any effort to correct itself.

at 0-40% throttle the quad drops motor one by 15 - 30 degrees

at 41-60% throttle the quad is more or less stable

at 61-100% throttle the qaud drops motor one by 15-30 degrees again

Reply to Discussion



Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service