Recommendation for a complete newbie

okay i dont know how handy you are with a build project but building one will hepl you understand how to fix it after the crash . because coaxial are great for lifting alot with a smaller frame but it is a smaller frame

i am currently using these products somethings can use improvment but money does grow on trees and harvest once a year

1 radio fs th-9rx with reciever ebay 100-120 usd (great 9ch, 2.4 Ghz spread spectrum , i have gone beyond 700M with this )

DJI f550 top and bottom plates from there you can build a hex-copter like intended or a y6b

Ready Made RC sells aluminium extended arms and lower motor mount bracket x6 145.usd

pixhawk with ublox lea gps (i used rtl with copter 500yds out landed inside a 3ft radius from where it launched) and 3dr radio and ppm encoder 399.98 from 3dr (customer service is the best on all levels shipping options are many

motors multistar 690kv good higher side of middle of the road 3s -6s batteries 10in -14in props i use dual 4s battery2650 mAh 13.5 carbon fiber T-motor style propellers try to have four spare propellars more if needed waiting for them suck

dual skywalker 4in1 25A esc

landing gear diy retractable carbon fiber its impossible for me to find retracts for a coaxial config. i have the drawingss i used this copter is a beast in my opion weight with 2 axis simple bcg this will lift a larger dslr gimbl and camera and still about 15min flight times getting late going to sleep if you would like to corispond i will return email good luck

Replies

rodger roth October 28, 2014 at 12:16am

okay i dont know how handy you are with a build project but building one will hepl you understand how to fix it after the crash . because coaxial are great for lifting alot with a smaller frame but it is a smaller frame

i am currently using these products somethings can use improvment but money does grow on trees and harvest once a year

1 radio fs th-9rx with reciever ebay 100-120 usd (great 9ch, 2.4 Ghz spread spectrum , i have gone beyond 700M with this )

DJI f550 top and bottom plates from there you can build a hex-copter like intended or a y6b

Ready Made RC sells aluminium extended arms and lower motor mount bracket x6 145.usd

pixhawk with ublox lea gps (i used rtl with copter 500yds out landed inside a 3ft radius from where it launched) and 3dr radio and ppm encoder 399.98 from 3dr (customer service is the best on all levels shipping options are many

motors multistar 690kv good higher side of middle of the road 3s -6s batteries 10in -14in props i use dual 4s battery2650 mAh 13.5 carbon fiber T-motor style propellers try to have four spare propellars more if needed waiting for them suck

dual skywalker 4in1 25A esc

landing gear diy retractable carbon fiber its impossible for me to find retracts for a coaxial config. i have the drawingss i used this copter is a beast in my opion weight with 2 axis simple bcg this will lift a larger dslr gimbl and camera and still about 15min flight times getting late going to sleep if you would like to corispond i will return email good luck
- Clayton Hill > rodger roth January 17, 2015 at 5:12pm
  
  Is their any good instructions online on how to go about building this UAV your talking about from scratch?

This reply was deleted.

Discussions

Recommendation for a complete newbie

Replies

Activity