The Remzibi OSD 3DR board is hard for me to review since it only worked for about 15 seconds. The board was able to connect to the Remzibi program but while uploading the firmware the board burned out. I haven't tried the Ardupilot Mega MinimOSD Rev. 1.1 and probably never will but if anyone has had any success with either one please let me know.

Views: 697

Reply to This

Replies to This Discussion

I had same issue with burn out however mine worked while connecting and modifying settings etc. It was only after connecting both camera and video tx that it burned. 12v trace to video in/out fried. Now to find another odd that works.

Reply to Discussion


© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service