Sneak Preview of next firmware revision?

I am posting this hoping to give some mouthwatering to all you Multicopter addicts!

The DEV Team is working really hard to get up with a new release of the current Arducopter.

I was brave enough (toghether with other testers like Marco!)  to try an (almost) totally untested clone from Tridge repo this Sunday.

The new DCM updates and the refined attitude control laws seems to be very promising.

The test were done with a Mini Quad (40cm), Medium Quad (55cm.) and a Hexa (65cm.)

Wether conditions were almost perfect (a little wind while flying mini quad), but it was dusk, so lightining conditions were not at the best.

This was the most stable flying copter I ever had. Controls were precise and reactive, but still giving a rock solid stability feeling. No drift even after very hard flying and an almost no hands with only STABILIZE mode.

All this was flown with only STABILIZE, no other mode was tested as it was out of my scope.

Enjoy!

Emile

 

P.S.

Please beware that this is an untested and not supported version. The current version in the repo has changed so I cannot guarantee that the flight will be the same. You need to know GIT, Arduino and other stuff to make it work.

Please be patient and wait for the official release, or if you want to test take your own risks.

 

http://youtu.be/yo7X0_ZZu_4?hd=1

http://youtu.be/ak8yChP-WbI

 

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Developer

    Echo was Jason said.... Its incredible. People are always asking if ArduCopter is going to be as stable as some proprietary systems... I say hell yeah! And guess what, the devs do it for free. :-D I'm thrilled to be a part of the ArduCopter community. I call it radically accelerated evolution.

  • Developer

    We were hoping this weekend, but it looks like we need to deal with a few minor issues regarding linear acceleration. 

    I can't stress enough what a monumental effort Tridge and the rest of the team and testers have put into this release. The level of engineering is staggering and the performance improvements are really impressive. It's a whole new copter in my opinion. The DCM fixes really help upstream things like Loiter because the angle hold is much more accurate.

    Exciting times.

  • Any idea on timeframe for when the official release will be?

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @chr1sa: At least when we do this with @DIYRobocars it doesn't cost $1 million https://twitter.com/dogryan100/status/1321800383505657856
3 hours ago
DIY Robocars via Twitter
3 hours ago
DIY Robocars via Twitter
Oct 23
DIY Robocars via Twitter
RT @_JonMyer: 🏎 We need your help in naming my #AWS DeepRacer Underground Track 🏎 @davidfsmith's track is going to be referred to as 𝗔𝗪𝗦 𝗗…
Oct 22
DIY Robocars via Twitter
RT @gclue_akira: 仕事もおわったし、電脳化にとらい #マリオカートハック https://t.co/4IU90hCLgm
Oct 22
DIY Robocars via Twitter
This is the hashtag to follow all the people in Japan who are hacking the new Nintendo Mario Kart with the real AR… https://twitter.com/i/web/status/1319281354664677376
Oct 22
DIY Robocars via Twitter
RT @gclue_akira: @chr1sa @diyrobocars jupyter mario https://t.co/P0oHdjlCRq
Oct 22
DIY Robocars via Twitter
RT @_JonMyer: 🚨Our 1st AWS DeepRacer Community Race is Underway on http://twitch.tv/aws 🚨 Join us to find out which member of your commu…
Oct 20
DIY Robocars via Twitter
Oct 19
DIY Robocars via Twitter
RT @BackyardRobotcs: After an admittedly long wait, the new Tinymovr R3.3 motor controller is now available https://tinymovr.com 🥳
Oct 19
DIY Robocars via Twitter
RT @_JonMyer: 🏎 1 hr left before the #AWS #DeepRacer Community 🏎 Top 5 Race tomorrow LIVE on Twitch 1st Place = $50 Amazon GC or AWS Credit…
Oct 19
DIY Robocars via Twitter
Oct 16
DIY Robocars via Twitter
Oct 15
DIY Robocars via Twitter
Oct 14
DIY Robocars via Twitter
RT @davidfsmith: Race virtually with The AWS DeepRacer Community Race and then join us on the track to see how your times compare on the ph…
Oct 14
DIY Robocars via Twitter
Oct 14
More…