Yesterday I almost lost my skywalker, just because stabilisation start doing strange things.
Good I fly without fpv in LOS only.
Here is the video https://www.youtube.com/watch?v=Z7FMUay3ktQ
In the middle of flight (4:20) I accidentally turned on flaps without stabilisation turned on, as speed was a bit fast plane do full loop (no too usual figure for skywalker). But I managed to recovery. Later I wanted some slow low passes and carefully turned flaps at first position and also stabilisation, plane immediatly go down, you can see at the end how lucky I was to save plane, just managed to turn flaps and stabilisation off somehow.
When I landed, I turned on stabilisation and eleveator goes full down, looked like it want to make loop back I made from accidental loop up.
Is APM works this way ? So I made some loops stabilisation will tray made these loops back ?
Or it's just temperature changes, which fiddle with gyros(there where about -10 celsius). Because aileron stabilisation worked ok.
Replies