Transmitter + Video relays.

This question is not a how to type of question but more of a will it work. I have an EZUHF system for my copter and goggles so i can FPV. However there are a lot of cables about me particularly connecting the antenna to the goggles. Also i have noticed my natural style of holding the tx means the antenna isnt in the right position.

I was thinking about building a tall pole with the antennas 2-3 m above the ground. The vid rx is 1.3 and the ezuhf is of course 433. My tx would work as normal at 2.4. THe pole would have another 2.4 rx which would be wired straight into the ezuhf tx. The vid rx on the pole would have a small 5.8 vid tx. I just bought a Skyzone goggles and it has 5.8 rx built in. This setup means no more cables, but the question is will it work well ? Is there anything im thinking of thats stopping this from working ?

At worst i wont be more than 10-20m from the obelisk with my antennas so the 2.4 and 5.8 should of course work. The pole can then have some nice fat high gain antennas at the right orientation for optimal reception and performance.

Comments ?

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • PS Are there any boards that can accept a RX and then relay and send PPM down a wire to my EZUHF tx ?

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ : A Home-brew computer club* for Connected Autonomous Driving. talk at #piandmore ⁦@PiAndMore⁩ on Jan 23rd h…
Saturday
DIY Robocars via Twitter
RT @a1k0n: New blog post! Deep dive into my ceiling light based localization algorithm which runs in 1ms on a Raspberry Pi 3: https://t.co/…
Saturday
DIY Robocars via Twitter
Great new guide to using @donkey_car https://custom-build-robots.com/donkey-car-e-book-en
Saturday
DIY Robocars via Twitter
RT @chr1sa: The next @DIYRobocars virtual AI race is tomorrow morn at 9:00am PT. You can watch live on Twitch https://www.meetup.com/DIYRobocars/events/275268196/
Friday
DIY Robocars via Twitter
New version of Intel OpenBot! This resolves many of the issues with the first version, including a much smoother tr… https://twitter.com/i/web/status/1352395636369313798
Thursday
DIY Drones via Twitter
Using ArduRover with an RTK GPS https://ift.tt/2N9I3RO
Jan 18
DIY Drones via Twitter
Jan 18
DIY Robocars via Twitter
Jan 18
DIY Robocars via Twitter
Jan 15
DIY Robocars via Twitter
Jan 15
DIY Drones via Twitter
Jan 14
DIY Robocars via Twitter
RT @Heavy02011: @diyrobocars : A Home-brew computer club* for Connected Autonomous Driving on Jan 23rd, 2021 https://www.meetup.com/Connected-Autonomous-Driving/events/275728684/ #Meetu…
Jan 14
DIY Robocars via Twitter
Jan 14
David Hori liked Isabella Domi's profile
Jan 12
DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ Autonomous Driving Assembly at #rC3. join us at https://rc3.world/rc3/assembly/diyrobocars-f1tenth/ ⁦@f1tenth⁩ ⁦@DAVGtech⁩ ⁦@DWalmroth⁩…
Jan 11
DIY Robocars via Twitter
RT @chr1sa: New car designs coming for our next @DIYRobocars @donkey_car virtual race on the 23rd. Choose any one you want at race time Le…
Jan 11
More…