Hi All,
We have a quad that we made using Phoenix ICE 75 ESCs with 0.60 Rimfire motors. We are using the Arducopter version 2.0.3 software on the APM.
We cannot get the motors to run no matter what we do. For those familiar with the Phoenix ICE ESCs, we get the 5 beeps and flashing indicating that the ESC is NOT seeing any signal coming from the APM outputs...
We were trying to get the ESC config done but all we get are these 5 beeps and no responses from the ESCs...So I cannot seem to get past the config phase...
Does anyone have any possible suggestions?
Thanks in advance
Marc
Replies