Discussions

Ublox GPS connector

Posted by gustyk! on December 30, 2014 at 12:21pm

Hi All, 
I have the UBOX GPS for the APM 2.6 I purchased from banggood.com
2014-12-25%2020.31.09.jpg

3691169608?profile=original

When I plugged the connector on the GPS side, the 6-pin block broke. 


 After pounding my fist against the table several time, I realized the other two connectors on the right, share the same signals; therefore, there is a chance I can add 2x 4-pin connectors, replacing the 6-pin. 

My question is, what's the name of those 4-pin connectors? I was told (in RCGROUPS) the connector is DF13, however, the connector on the UBOX LEA -6H board is narrower and keyed. It is similar to the DF13 series, but definitely, not the same.

Any ideas where to get those connectors/cables?

All the suppliers selling cables for these GPS offer the 6-pin connector in one end and two connectors in the other end (2-pin and 4-pin)

Thank you in advance for your help.

Gustyk

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • gustyk! January 6, 2015 at 1:46pm

    Here is a closer look.

    https://www.dropbox.com/sc/httcauliowc1l8v/AAB-A7XEzc499HPUPRjLiQhZa

    Dropbox - Error
    Dropbox is a free service that lets you bring your photos, docs, and videos anywhere and share them easily. Never email yourself a file again!
  • Moderator
    Nathaniel Caner December 31, 2014 at 2:05pm

    Did you damage the pads on the board when the connector broke off? Why not just re-solder the connector to the board? I know it's small, but it is possible. I know because I broke a connector off my ArduIMU+ V2 board a few years back.

    3701903845?profile=originalRe-soldered the connector and bingo, back in service.

    Regards,

    Nathaniel ~KD2DEY

    • gustyk! > Nathaniel Caner January 6, 2015 at 1:21pm

      Hi Nataniel, Yes. I tried that but the connector dragged the tin pads off the PCB board. Thanks anyways!

  • Richard December 30, 2014 at 1:18pm
    What, don't tell me the 24hr customer support line for banggood couldn't help??
    • gustyk! > Richard December 31, 2014 at 12:18pm

      Richard,  congratulations! You got an A+ in irony. and D- in adding value to this thread.

      The (pricing) reasons for selecting one or other vendor are going beyond the scope of this forum. Thank you for your understanding.

      Happy new year,

This reply was deleted.

Activity