Howdy folks, I purchased an APM 1 just under a year ago (combo kit) from Udrones.
It was setup for Arduplane and I added an extremeBee telemetry kit. I got tied up
with a back injury and working on my hexa/quad for some time and decided to use the xbee to work in conjunction with my quad.
Well, I pried open the box today and I am not really sure what I am looking at.
It seems most of the manuals have two other boards connected to each one of these (shown in the
picture attached) and not really sure where to go from here.
Via the pictures, do I have enough components to get started? Am I missing something either forgotten by the supplier or are there more components I need to purchase separately?
Thanks for any help, the user groups are showing me things that seem to be updated or
different than what I have.
Thanks in advance for any help.
Best,
J
Replies
For XBees see https://www.sparkfun.com/categories/222 for the 900MHz version
3DR radios that replaced then here http://store.diydrones.com/3DR_RadioTelemetry_Kit_915_Mhz_p/kt-tele...
Have you looked at the Arducopter Wiki?
Here's a link to the Wiki page for APM! with Xbee.