I'm using the latest NG code, with 2 XBee Pros and sparkfun adaptors. Using the X-CTU serial monitor I can send characters from my laptop's USB xbee to the xbee connected to the IMU, but the data being returned on the link is always either 0x00, 0xFF, or 0xFE.
The tx and rx lights on the xbees are flashing when I type characters in X-CTU, so the wireless link seems to be working. But I only receive the three values back from the IMU. I've configured both xbees to 57400 baud, and enabled carriage return in the X-CTU terminal. I've tried both normal and CLI modes - still get nothing back...
Any help would be appreciated.
Thanks,
Ken
Replies