Feature request: Breadcrumb based RTH

I had an idea for a breadcrumb based RTH system which would allow for return to home based on waypoints that have already been flown successfully. The basic idea would be to allow the pilot to flip a switch on his transmitter at several points during flight, and if RTH is enable the plane would return to home along a known good path. Is this possible?

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Based on a previous commercial system I worked on, a few additional suggestions: 1) capability to enter onto the inbound plan at the nearest waypoint, rather than a fixed "entry point"; and, 2)  the ability to define a spatial volume within which any RTL behaviour is acceptable.

    The first means that your vehicle won't do unreasonable things such as head further outbound to start RTL. The second is more involved but can be achieved using a variety of techniques, such as a volumetric nav mesh and online planning.

  • +1 on that one !! :-)

  • Simply a secondary flight plan loaded into the APM that triggers upon failsafe.
    That would allow you to program a set & forget approach to autolanding for emergencies. Great idea. Post that on github.
This reply was deleted.