Only 5 flight modes available

Posted by Robert Botnick on November 26, 2013 at 7:05pm

APM 2.5 using 2.76. I only have 5 flight modes as the 6th is grayed out and unelectable when setting up.

I also tried setting the 6th mode by the Standard Parameter page. It would indicate the 6th Flight mode changed, but after repowering back up it would not be set again.

 

I have 3 other Arducopter boards that I fly and no issue getting the 6th mode.

 

Any ideas?

 

Thanks

 

Bob

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Neil French December 3, 2013 at 10:59pm

    It's funny that it's constrained to the highest PWM though, meaning any other flight mode must be the one your TX will use in its startup switch position. I've inverted the output on that channel on my TX so that manual is selected at startup but it looks a bit confusing in the configuration now.

  • james sowell November 27, 2013 at 4:23am

    im getting stab. alt. hold acro. and toy cant get pos. hold or rtl any thoughts ?

  • John Hutchison November 26, 2013 at 7:56pm
    Choose 5 other modes for the other slots...the 6th one defaults to manual for me so 1-6 are set as rtl... cruise...auto...stabilize...loiter...manual
This reply was deleted.