Posted by Bill Geyer on October 14, 2015 at 3:53pm
I have designed and built a unique helicopter that uses two forward facing tail rotors to provide anti-torque and directional control as well as forward thrust. I have a servo to controlling directional axis and another servo controlling forward thrust which are mechanically mixed for the tailrotors. I have selected servo only for the yaw axis in the set up. I can only get channel 6 to provide an RC pass through. I want to use channel 6 to perform PID tuning. How do I get channel 7 to provide an RC pass through? I used the function parameter to set the RC pass through on channel 7 but that did not seem to work. Looking for how to configure channel 7 for an RC cost through.