Replies

  • andi azhar January 17, 2016 at 10:32am

    how is it mate? it fly already? ^_^ im willing to help, im new too, and having great fly yesterday..

    • Nikoloz > andi azhar January 18, 2016 at 11:38am

      I waiting to new ESC and I will reply when I test it

  • Nikoloz January 12, 2016 at 10:44pm

    Thanks a lot for your answer.

    Best Regards

  • Nikoloz January 12, 2016 at 9:35am

    I already calibrate ESC but I do not sure it was in stabilize mode I will try.   

  • Cala January 12, 2016 at 8:25am

    Are motors spinning correctly?, did you calibrate esc?, props are in correct side CCW,CW?, some photos, sometimes helps others to help you.

    • Nikoloz > Cala January 12, 2016 at 9:31am

      motors are spinning in correct direction but rpm are different I calibrate ESC separately also.  

    • Tony K > Nikoloz January 12, 2016 at 9:42am

      thats normal.. they have to spin different rpm to balance your quad.. 

    • Nikoloz > Tony K January 12, 2016 at 10:41am

      but when I trying to fly copter turns right, nose up first and flip 

    • Tony K > Nikoloz January 12, 2016 at 11:54am

      i know you said you checked but i still put my money on prop orientation or motor placement. check your prop orientation/correct prop. If any of that is wrong it will cause that type of issue you described. I know its not advised but what i would do and have done with my quad in early stages is arm it and pick it up hold it above your head and throttle up. Check to see if its even thrust and any abnormality. 

    • Nikoloz > Tony K January 12, 2016 at 10:43pm

      you are right the motors was installed wrong :) I changed them but one of the ESC burn, so I will try when ESC will arrive

      Best Regards

This reply was deleted.