Arducopter Delivery Drone

Posted by Ismail_ID on July 26, 2014 at 12:15am

Hi,Greeting from Indonesia.

Now,i've a plans to build a delivery drone for my school.

And now, i run APM 2.6 3.1.5 with U-blox gps

my question is...what parameter and what flight modes should i set for that drone?

Many Thanks for any answer

Cheers,

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Antonie Kruger July 26, 2014 at 12:57am

    Hi Ismail, head over to the copter wiki. All the flight modes are explained in detail : http://copter.ardupilot.com/

    Everything you need to know is in there.

    Good luck with your venture.

    Antonie

    • Ismail_ID > Antonie Kruger July 27, 2014 at 4:11pm
      Thanks for your suggestion sir...it help much to me...now,i will start to think what frame must i made that can fit the goods releaser mechanic and the camera

      Cheers
    • Ismail_ID > Antonie Kruger July 26, 2014 at 4:27am

      Thanks Antonie for your answer....now i have an enlightenment in my mind...my next question is...what vehicle should i make?H-Copter or X-copter?

      sorry for my long question and my bad english
      again,thanks for your answer,sir

      Cheers,

    • Randy Brazeau > Ismail_ID July 26, 2014 at 9:48am
      Either frame works well but I suggest you go with the X frame.
      I assume you have a limited budget therefore keep your requirements simple.
      Select a frame that fit those requirements. Example, I have a frame that can hold a camera. I don't need a gimbal but I can't control the camera. Gimbal requires servos etc...
      Perhaps a frame that you can build on. Keep it simple and learn to fly safely.
      3DR has a good selection of parts that work well together.
      My 2 cents.

      Randy
This reply was deleted.