I am a ArduCopter enthusiasts from China, my APM flight control from the Made in China, mainly I am here to purchase community goods inconvenient, in fact, I am willing to buy goods in the community. Due to this reason I try to purchase this rack 3DR ArduCopter Quad community, but I failed again, so I want a 3DR ArduCopter Quad drawings of the rack, and then reference drawings do a rack. Hope that well-meaning friends drawings give me a copy of it? I am very grateful.
Well-meaning friends Thanks again!
You need to be a member of diydrones to add comments!
Replies
Are you referring to the original Arducopter with the many, many, plastic parts? If so there were drawings available though I cannot find them at this time.
The 3DR drawings of the current release (Version C) are not available. The B version was on the 3DR site for download.
Here is shot of the basic dimension of the B version (no copyright information was on the original plans - pull this post mods if told to).
The dimensions are in inches. The newest Ver C has shorter arms, different drilling pattern for the motors, and modifications for the central body. I am sure the tuning variables are adjusted for the reduction in moments.
I build all my *frames* (short for airframe) and I assume this is your meaning for 'rack'.
Good luck! You should be able to start your project with this basic information and some online research.
-=Doug
"Well-meaning friends Thanks again!" - yeah right.....I suppose the product will be called 3CR(C for china) Arduflyer quad.