Can the Minim OSD be connected to the Arducopter 2.6 simultaneously with a telecom MavLink transceiver? I am using a HKpilot mega 2.7 controller. It looks like the ports are the same as the Arducopter 2.6.
You need to be a member of diydrones to add comments!
Replies
Thank you all. I'll try splicing the telecom cable.
Does anyone know which is better to use - the Mission Planner or the APM Planner 2 on the HKpilot mega 2.7?
You were right, there is a "Y" cable included with the Minim OSD. I'll use that.
http://static.rcgroups.net/forums/attachments/1/3/3/6/1/3/a5531243-...
Hi Robert. You should be able to connect using a splitter which you could make yourself or buy one from HK, Goodluckbuy or Banggood. You just need to leave the Tx line off for the Minim, and be sure to connect the ground on the video end.
Have a look at this too:
https://www.google.com/url?sa=i&rct=j&q=&esrc=s&sou...
http://copter.ardupilot.com/wiki/common-minim-osd-quick-installatio...
Good luck.DP
You splice the wires to make y-cable for connection. Examples are all over the web.