What is causing the problem when I plug-in my quadcopter (Quanum Nova) and there is no response. No lights, no beeps, just a clicking sound coming from the propeller motors.
You need to be a member of diydrones to add comments!
I checked transmitter, throttle is at minimum setting; no change noted.
Correction in my previous correspondance > there is a continuous beeping and clicking sound from each unit connected to the propellers, but no system initiation or GPS lights.
looninho > Chester G. FarmerOctober 10, 2014 at 9:44am
Hi Chester,
If you have 3s LiPo, you should hear ending 3 bips from your ESC, that means power is OK.
What happens when you try to arm your Nova?
For locking GPS i think you must wait some while for detecting enough satellites.
Replies
Hi Chester,
check your transmitter if throttle is minimum.
Hi Looninho,
Thanks for responding!
I checked transmitter, throttle is at minimum setting; no change noted.
Correction in my previous correspondance > there is a continuous beeping and clicking sound from each unit connected to the propellers, but no system initiation or GPS lights.
Hi Chester,
If you have 3s LiPo, you should hear ending 3 bips from your ESC, that means power is OK.
What happens when you try to arm your Nova?
For locking GPS i think you must wait some while for detecting enough satellites.
good luck
امروز با این مشکل روبرو شدم
دلیل بروز مشکل پایین آمدن ولتاژ باطری بود
today I encounterd this problem and the reason was voltage fall