Self tightening props for TBS Disco 900 kv Motor users

Posted by Edgar Scott on July 25, 2014 at 1:57pm

I wanted to have self tightening props so I could get my disco pro ready faster after taking it out of its case, I looked a lot and finally found a prop adapter that would work...and it works great!

So I thought I would share it with the other TBS owners out there.

Here is what you need

2 CC and 2 CW
http://www.aliexpress.com/item/Tiger...763842644.html

I used the gemfan props self tightening carbon fiber props
http://www.getfpv.com/gemfan-9-4x4-3...-set-of-2.html

Here's how easy it makes it

Ed,

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Edgar Scott July 25, 2014 at 3:29pm

    I also noticed that my Graupner 10" bolt on still fit perfect, in fact even better as there is no need to the 5mm to 8mm spacer as its built into the prop adapter.

    In pic below all fit well

    • Top right Gemfan Carbon Fiber spin on - 9.5"
    • Bottom Right DJI Phantom self tightening spin on -  9.5"
    • Bottom Left Graupner bolt on - 10"


    3701793192?profile=original

This reply was deleted.