I loaded the latest firmware onto my standard 3DR quad, apm 2.5 today, and the standard .param file, only done stab flying, but it appears to be quite locked in.
Oh, the clicking noises from the motors are gone too :-)
Daniel Estes > Gustav KuhnJune 27, 2014 at 12:54pm
Well, I reloaded the firmware and calibrated the copter. It twitched about three times and took a nose dive at about 12 feet. It took out three Graupner props and an 8000 mAh battery. - not happy.
As I have mentioned before, this is not my first APM. Verrrrrrry frustrated.
Replies
I loaded the latest firmware onto my standard 3DR quad, apm 2.5 today, and the standard .param file, only done stab flying, but it appears to be quite locked in.
Oh, the clicking noises from the motors are gone too :-)
Well, I reloaded the firmware and calibrated the copter. It twitched about three times and took a nose dive at about 12 feet. It took out three Graupner props and an 8000 mAh battery. - not happy.
As I have mentioned before, this is not my first APM. Verrrrrrry frustrated.
Attached is the tlog.
Need some help.
Thanks.
2014-06-27 15-18-15.tlog
I could be wrong, but something looks suspect in the RAW_IMU graphs. If so, what is the cause?
Need some help.
Thanks.
Okay
Also, when you say erase, do you mean the following?
Terminal
Setup
Erase
Thanks.
Upgrade to latest firmware