Replies

  • LoopZilla March 4, 2015 at 9:11am

    Has there been any re-consideration into using the Myo armband for gesture control?

    • Keith Geary March 7, 2015 at 2:14am

      Hi Scott,

      Nice to hear you like the concept. Filip will start integrating the MYO band with an arduino controller in April, so we'll keep you posted directly and put some general information about our progress on this forum.

      Best Regards,

      Keith,

    • McDanolds > Keith Geary June 18, 2015 at 8:22pm

      Do you guys know the port file for mission planner to put in the EXE active window? ArdupilotMegaPlanner10.exe doesn't work.

    • Keith Geary > LoopZilla March 4, 2015 at 1:23pm

      In short, yes its still our ambition, Filip has broken his hand, so this has delayed things, but we expect to start again in April.

  • Ando August 11, 2014 at 10:51am

    Hi Keith and Fillip,

    I am working on integrating the Myo as well (just ordered my Myo today). It would be great to collaborate on this!

    How are you thinking of connecting the computer to the RX tx? I've looked at Endurance-Rc and creating a homebrew Arduino solution, but the challenge seems to be syncing the transmitter to whatever system through the trainer port. Every brand seems to have its own syncing mechanism, and has to be reverse-engineered.

    All thoughts/ideas welcome.

    Cheers!

    Endurance R/C - PCTx - PC to Transmitter Interface
    • Keith Geary > Ando August 12, 2014 at 3:34am

      Hi Ando,

      As yet we have not received the MYO SDK, so we decided to start with a SudoGlove, then once the MYO SDK arrives integrate that in the same way. You can see Filips progress here.

      Best Regards,

      Keith,

    • Ando > Keith Geary August 12, 2014 at 4:05am

      Hi Keith,

        Thalmic has released the SDK for Myo here. I've never developed OSX apps on Xcode or programmed in Objective-C before, so the learning curve for me is quite steep.

      Are you developing on a mac/windows/android?

    • Ando August 12, 2014 at 12:31pm

      Fillip,

      Thanks a lot for the helpful feedback. Can you give me more details on how you are interfacing an Arduino with the OpenTx of the FrSky Taranis? 

      Thalmic has released the SDK for only Mac and Windows.How are you interfacing the MYO directly with the arduino also? I dont see any specifications on the bluetooth packets.

      Cheers!

    • Keith Geary > Ando August 12, 2014 at 4:12am

      Hi Ando,

      Please take the conversation up with Filip after reading his progress page, until the MYO SDK is in our hands we are not making any plans, as its now over 6 months since it was ordered, hence the plan B, to use a SudoGlove.

      Cheers,

      keith,

This reply was deleted.