Hello, new to flying. Bought an Iris almost 2 years ago and never had a chance to fly it. Also bought the Iris plus upgrade kit when it was available. One of the first things I wanted to do when I retired was to fly this bad boy. So the other day I did the upgrade and did all the required re-calibrations and parameter upgrades. Everything seems ok other than the channel 7 switch for land now. As I went into mission planning working all the switches it appeared that channel 7 was reversed, when I flipped the switch down to "on" the green bar went from full to almost off. I then hooked it up to droid planner and it only verifies when it starts in the down position. I then confirmed by actually flying. When the switch was at the up position and then switching it down nothing happened. But when I started in the down position and flip the switch up it landed.i contacted 3dr but they said they did not support the radio. So is the a way to program the switch, or can I open the radio and physically rotate the switch 180, or should I just relabel the controller. Thanks for listening.
You need to be a member of diydrones to add comments!
Replies