Gender
Male
About
Location
Choose State/Province
Please tell us a bit about your UAV interest
just an enthusiast
Hometown:
Santander
Activity Feed
"Thank you very much Guillaume for your reply. I don't have more information about my crash. I didn't know that RTL use a different algorithm than AUTO, that could explain the problem. And thankyou for the idea of switching to a preprogrammed landing…"
"Hi Guillaume,
Did you find any insight in the cause of this crash? I have came across your post because today we had exactly the same problem with a Bormatec Maja. It was flying in FbwA almost leveled, at the speed of 20 m/s; when we switched to…"
Did you find any insight in the cause of this crash? I have came across your post because today we had exactly the same problem with a Bormatec Maja. It was flying in FbwA almost leveled, at the speed of 20 m/s; when we switched to…"
"Hi Robert,
you cannot remove the "python" part because both mavproxy.py and serial2udp.py are python scripts and need to be parsed by the python interpreter. If you remove "python", the script is interpreted by the shell and that is the reason for…"
you cannot remove the "python" part because both mavproxy.py and serial2udp.py are python scripts and need to be parsed by the python interpreter. If you remove "python", the script is interpreted by the shell and that is the reason for…"
"Hi Robert,
I am replying from memory, but I think that I just put a "return" in this piece of code of mavproxy.py:
def log_writer(): '''log writing thread''' return while True:
However, CPU usage reduction was small.
At the end, instead of using…"
I am replying from memory, but I think that I just put a "return" in this piece of code of mavproxy.py:
def log_writer(): '''log writing thread''' return while True:
However, CPU usage reduction was small.
At the end, instead of using…"
Hello to all,I was using Mavproxy in a raspberry pi 2 just to send the telemetry from the pixhawk serial port to the groundstation using UDP and a WiFi link. The only other process running in the raspberry pi was gstreamer for FPV, and everything…
