Gender
Male
About
Location
Pomorskie
About Me:
Drone designer, builder, programmer :) 3d printing and Android programming.
Please tell us a bit about your UAV interest
One X250 series on CC3D and now finishing X500 with ArduCopter APM 2.6 for long flying and filming
Hometown:
Władysławowo
Activity Feed
"Thank you for your answer. I was aware that I,m trying to use more thrust than I probably should. The plan was to be able to fly with one or two batteries so i have a frame for both uses.
My main issue is that I was using CC3D in my previous build…"
My main issue is that I was using CC3D in my previous build…"
"Sure, motors are exactly EMAX MT2212 935KV and props will be Gemfan 9443 or 1045, i have 30A Emax ESC's and this config should have above 2400g thrust :)
Weight without batteries is 737g.
But with one battery or two (2x 465g) I would still like…"
Weight without batteries is 737g.
But with one battery or two (2x 465g) I would still like…"
Hi, I'm building X quad with 1000kv motors and 9443 props with APM 2.6. I want to fly with 2x 5000mah batteries but I'm getting only half of my motors power and quad is barely lifting itself.I've checked ESC and Radio calibration and all seems to be…
