Hi,
I like using the ROI feature and so far have used it with the camera in a fixed position.
Now I want the Pixhawk to control the tilt angle as described here:
http://planner.ardupilot.com/wiki/common-tarot-gimbal/
All of that working to calculate the
Read more…Hi All,
I'm running a DFI-550 Flamewheel style hexacopter with a Pixhawk controller. I have just started running missions by arming the unit, flippimg to Auto on the TX, then raising the throttle stilck to take off. Works great!
Well the other day I
Hi All,
I'm running a DFI-550 Flamewheel style hexacopter with a Pixhawk controller. I have just started running missions by arming the unit, flippimg to Auto on the TX, then raising the throttle stilck to take off. Works great!
Well the other day I
Read more…Hi All,
I have been trying for a bit to enable 6 flight modes using mixes for the JR 9503, but have had no success.
Does anyone use a 9503 and can tell how you set up the 6 flight modes?
I would like to use the 2-pos Gear switch and the 3-pos Flap switc
Read more…Hi All,
This weekend I flew my first Auto Mission, Yay!@@
It was a simple one and I just hovered in Stabilize and then flipped into Auto. After that worked well I attempted Auto-Tune, but it never finished as my GCS voice said "Loading RTL", and then
Read more…Howdy All,
I have been learning Mission Planner and am now at the point of trying an actual mission, and I have a couple of basic (as in obvious to the experienced user)...
I have a mission all set up with 4 waypoints, the first being near where I inte
Read more…Hi All,
I am starting out with the Droid Planner on my tablet and have not gotten into waypoints yet, but I was exploring the different tabs. Today when the hex armed, my DroidPlanner voice said, for the first time:
"Armed... Waypoints Received"
and a
Read more…Hi All,
I have a peculiar little problem with my 2 UAV's.
I have a lone ground radio that I can use for both machines. On the quad I use an On-the-Go cable with my Android tablet to connect and it works great.
The hex can use the same ground USB radio
Read more…2. What does the "FMT"Hi All,
After solving some small things I tried to do the Auto Tune procedure whose prerequisite is getting the quad to fly well in AltHold. Well, it sis not! As soon as I flipped into AltHold the machine shot up about 20 feet,
Read more…Hi All,
Today I took my F450 for its first test flight ever, in Stabilize mode. It was windy, gusting to 15 but it was OK except that the wind caused it to oscillate about 10 - 15 degrees. The wind was running left to right, quad was nose out, and t
Read more…Howdy All,
I have an F450 with APM 2.6 running v3.2, with the DJI Opto 30A ESC's.
Since these ESC's are preset at the factory to have a predetermined PWM range, what might be causing the one ESC to be the laggard? That motor starts at about 22% thrott
Read more…