Location
Buffalo, MN
About
Please tell us a bit about your UAV interest
Newb DIY multi-rotor builder.
Hometown:
MN
Activity Feed
"If I choose to skip the power module and run with just this PDB, which appears should work for current sensing, is it sufficient to ensure the voltage divider is adequate to drop the 3s or 4s battery voltage below the BBB 3.3v gpio limit and then…"
"Thanks Vinicius,
Here's the link to the ESCs, the datasheet is on the specifications tab. These ESCs run Castle Creations' firmware. Based on my research these are fairly configurable and do some dynamic adjusting on their own. So my thought was…"
Here's the link to the ESCs, the datasheet is on the specifications tab. These ESCs run Castle Creations' firmware. Based on my research these are fairly configurable and do some dynamic adjusting on their own. So my thought was…"
First time poster and newb DIY drone builder. So please pardon my ignorance.I've sourced parts for a DJI Flamewheel 450 clone. Obviously the FC is the BBBmini, along with the recommended baro, gps, sonar sensors also picked up a genuine 3dr…
