Gender
Male
About
Location
Kyungki-do
Please tell us a bit about your UAV interest
I'm interested in Y6 multicopter for Arduino
Hometown:
Seoul
Activity Feed
"The Clooney82's template provides "0 ° 00' - 0 ° 00' " unit and my template format only provides "0 °". So I can read GPS long integer data (ex:2883123333) at Telemetry screen.But, the Clooney82's template provides correct GPS format data such as…"
"I'm using Clooney82's mavlink for teensy with OpenTx2.1. I tried to config GPS telemetry data for OpenTx 2.1. But, the gps data that Clooney82 provides Model000-2015-09-09.bin is working. But I can't set GPS telemetry data for my own model.…"
"Hi,
I use OpenTX 2.1 and I don't use FrSky FLVSS so I use USE_FLVSS_FAKE_SENSOR_DATA compile option. I'm able to get Cmin value from teensy with average cell voltage using the FAS. I should use FLVSS to get the correct minimum LIPO cell voltage.…"
I use OpenTX 2.1 and I don't use FrSky FLVSS so I use USE_FLVSS_FAKE_SENSOR_DATA compile option. I'm able to get Cmin value from teensy with average cell voltage using the FAS. I should use FLVSS to get the correct minimum LIPO cell voltage.…"
"I installed recent Clooney82's teensy 3.1 code and Lua script. Everything is working good but Cmin value is not working. Cmin value is always zero and I use Arducopter 3.2.1 firmware. In addition, I don't use other addon functions. Please let me…"
"I don't understand that you said. It's compiling warning and it's not related to GPS values. There is no GPS data in your captured image also."
"I tried your code. But it's the same result that the degrees and minutes are zero. As you know just replace Serial1 from Teensy code and comments the C1,C2,C3 UARTs. I got the correct sensor values except GPS's latitude and longitude values that the…"
"It was ok when I used Teensy. But there is something wrong for Arduino Pro Mini. Everything is perfect for Arduino Pro Mini. But, latitude and longitude of GPS is something wrong. It said that "0N00'2.502, 0E00'4.860". Degrees and minutes is zero.…"
"I tried it in 2.08 taranis firmware, but it still has an same issue."
"I already restored taranis 2.0.5 firmware from 2.0.7 so everything was normal. I've been waiting the solution of this problem.
Thanks."
Thanks."
"I upgrade my taranis x9d 2.0.5 firmware into 2.0.7 and after upgrading, cell and cells function in the teensy does not working. The value of cell and cells is always zero. When I used 2.0.5 taranis firmware, everything was working great. I think…"
