"The best thing to do is buy a cheap receiver (HobbyKing.com has some for around $6).  Plug the satellite into the receiver and bind it as you would any other RC gear.  Once bound, unplug it from the receiver and plug it into the Oilpan.  There is no…"

"I would have thought it would be in the source code somewhere.
Otherwise you can use the "-U flash:r:flashDump.hex:i" option with Avrdude to save the current flash data.  Then you could always restore it with "-U flash:w:flashDump.hex:i""

"Alfred, it is only for the satellite receivers.  You would need to load the old sketch (an remover the small board) to be able to use it with a regular receiver again."

"I bound my satellite with a 7 channel receiver (and not the APM) and I am starting to wondering if the Spektrum satellite only puts out 7 channels when bound with a 7 channel receiver?
I also found another post which sets out the protocol for the…"

"Doug,  I'm assuming that you mean the code on the 2560 chip and not the 328p (since this is new code for the Speaktrum Adapter).  If so I don't beleive the problem lies with the numbering convention.
I have had the same problem with Ch8 = Ch7.  I…"