About

Gender

Male


Location

Prague


Please tell us a bit about your UAV interest

APM2.6, FrSky, Turnigy 9x, telemetry


Hometown:

Prague


Activity Feed

Czech Uav Guy replied to Czech Uav Guy's discussion APM Mavlink over FrSky and then back to Mavlink
"The error is so fuzzy I am really not sure whats going on. Please explain your steps in bigger detail:
1) do you have Arduino Pro Mini?
2) do you have Arduino IDE?
3) can you A) compile and B) upload a very simple arduino program to your arduino?…"
Dec 6, 2016
Czech Uav Guy replied to Czech Uav Guy's discussion APM Mavlink over FrSky and then back to Mavlink
"I didn't make any serious progress. What I have done is this: I have disconnected one potentiometer on my transmitter, and instead I have connected arduino with external DAC. So the  transmitter thought the original potentiometer was still…"
Nov 29, 2016
Czech Uav Guy replied to Czech Uav Guy's discussion APM Mavlink over FrSky and then back to Mavlink
"Its great to hear that another person is going to use it. Good luck, I think you could make it. If you had troubles, feel free to ask!
As a starter, I would recommend trying the "demo" project and there you will see whether the decoding part works…"
Nov 26, 2016
Czech Uav Guy replied to Czech Uav Guy's discussion APM Mavlink over FrSky and then back to Mavlink
"This project is based on https://github.com/vizual54/APM-Mavlink-to-FrSky so you can find the libraries there.
I will try to upload them to my github as well."
Mar 20, 2015
Czech Uav Guy replied to Czech Uav Guy's discussion APM Mavlink over FrSky and then back to Mavlink
"At first, I also used only MissionPlanner (on Win though), but then I decided it would be more comfortable to use Android-based station. So I would have to implement another translating SW. If you are comfortable with programming on Linux, it should…"
Mar 15, 2015
Czech Uav Guy replied to Czech Uav Guy's discussion APM Mavlink over FrSky and then back to Mavlink
"Zdar Pavle
What do you mean by skipping ground station hardware? You mean to modify MissionPlanner or DroidPlanner to be compatible with my two-byte protocol?
If yes, then I don't like this idea because I would have to maintain it forever. When I…"
Mar 15, 2015
Czech Uav Guy posted a discussion
Hi guys!Who wants to transmit APM Mavlink telemetry data to ground station using FrSky only? (e.g. without 3DR radio)Using two Arduinos I have made this possible. One Arduino ("sending part") is on the plane between APM telemetry UART and FrSky…
Nov 28, 2014