HiI have always had a power module between battery and power distribution. Is that a good idea on an S1000 or should the power module be connected to the PDB just for the pixhawk? I guess the ability to measure current is going to be the only issue b
Read more…HiWhen a mission is saved in the solo has anyone found a way to program the controller to change to auto?I realize you can't load the mission without a program but once it is loaded it would be nice. Using a laptop in the truck to load it and monitor
Read more…HiI am putting an S1000 together with Pixhawk. On my Hex I'm using 200A Mauch but I'm unsure about the current draw on the S1000+ with 20,000 mah battery and possibly 2 20,000 mah batteries. If I go with 2 batteries I should probably have one power m
Read more…HiIs it possible to switch between 3s and 4s batteries without tuning?I have a 550 tuned with 3s 5000 and when I try to run 4s 5000 it wobbles really bad. I guess if I tune it to 4s the 3s would work okay. I was thinking I could save the parameters t
Read more…Hi
I have a flash log from Iris+ and it appears that a brownout occurred. Maybe after crash, I'm not sure. I don'y know why it would have crashed. Can someone have a look?
Regards
Read more…HiFlew my hex x a few days ago and it flew great. Over 50 mph and very stable. Pixhawk came out of an Iris+. DJI e310 kit.The following day I was getting compass errors. Calibrated it several times and it was okay. Took off and it was very shakey. Th
Read more…I ordered a 78" Hercules XL
It will be running 35-30A 1400kv motors, 70A Turnigy Trust ESC's and starting out with four Nono-Tech 5000 mah lipoly batteries.
Control and telemetry will be Dragonlink 433MHz
FPV will probably be 2.4 GHz or 1.2 GHz.
PixHawk
Read more…