Gender
Male
About
Location
Trikala , Thessaly
About Me:
I am a Telecommunications engineer in the Hellenic Air Force (military personnel) and a passionate model airplane builder for the past decade or more...
Please tell us a bit about your UAV interest
My main interest is FPV, but when I saw the specific capability of an Autopilot to save my plane and/or people and properties below that, I was thrilled and knew right then that Auto is the way to go in wireless model aircraft imaging, telemetry and other systems...
Hometown:
Trikala
Activity Feed
"Some photos of the stabilators below... Rectanguler carbon tubes are used. 6 mm are glued inside the foam cores, while another 4 mm one is responsible to join the two halves. A small, 2 mm screw with a tiny nut inserted in a piece of plywood on the…"
"Good Eveving everyone.
I'm sorry for being absent the last days, but we had the Greek Easter here, with all these family meetings, Lamb roasting etc, so we were kept a bit far from our PCs... :)
Joe, thank you very much for posting on our Thread. As…"
I'm sorry for being absent the last days, but we had the Greek Easter here, with all these family meetings, Lamb roasting etc, so we were kept a bit far from our PCs... :)
Joe, thank you very much for posting on our Thread. As…"
"Oh, by the way... Our Official site is Down since late last night due to some network problems by the National Telephony company.
We are sorry for the inconvenience... :)"
We are sorry for the inconvenience... :)"
"Some pictures of the First "acceptable" fuselage Mold we have so far, and the first three fuselages that came out of it... The last photo shows a 4th fuselage too... Fuselages come out of the Mold as One piece right now, meaning that two halves are…"
"Even starting on the Kit version, wings have All spars glued in place from us, and moving surfaces (Flaps & Ailerons) are already Cut. Our flaps & ailerons are part of the airfoil, so we need to have them made here, on our workshop, leaving you with…"
"Good afternoon Dani. It's six thirty in the afternoon here... :)
Here are some pictures of the wing we currently make... There is a female 12 mm carbon tube using VEC technology (weaving pultrusion) in the center Spar and two smaller 4 mm carbon…"
Here are some pictures of the wing we currently make... There is a female 12 mm carbon tube using VEC technology (weaving pultrusion) in the center Spar and two smaller 4 mm carbon…"
"Hello Phil. Thanks a Lot for the comments. That was exactly our intention... Love. :)"
Good evening to All. The fifteen plus years of my involvement with airmodelling, has sometimes brought me in strange paths, mysterious driveways, beautiful agony. The journey to Ithaca continues with great passion for research, construction, testing…
"Oh man... James, at last you're slowly but steady showing your work in THE Drone forum.
It's been a while (about a year) that we've been working on that New platform. It's quite promising since wind-tunnel simulators gave us nice numbers for it's…"
It's been a while (about a year) that we've been working on that New platform. It's quite promising since wind-tunnel simulators gave us nice numbers for it's…"
"Me and my friend's quest for bigger but simple to built planes, took us on a journey to start building larger models back in 2009... Here are some of the first videos of the first big foamy...…"
"Hello All. It is 19:20 in Greece right now.
I always had special feelings for tailless aircraft, and that feelings grow bigger and stronger by seeing new planes, manned and not, in that Form-shape... Nature however, was maybe trying to…"
I always had special feelings for tailless aircraft, and that feelings grow bigger and stronger by seeing new planes, manned and not, in that Form-shape... Nature however, was maybe trying to…"
"Good morning everyone and have a nice week...
Nikos, thank you so much for your kind words... I'll post some more photos of the large pusher-type I'm making...
> The tail section (Vertical Fin with Rudder & horizontal stab with elevator) are mockups…"
Nikos, thank you so much for your kind words... I'll post some more photos of the large pusher-type I'm making...
> The tail section (Vertical Fin with Rudder & horizontal stab with elevator) are mockups…"
"Oh man... Hahaaa... Krzystof, that's a Brilliant Idea!!
Ohh... she's gonna love it. Great to see people combine their passion and romance together with Nice results._
:)"
Ohh... she's gonna love it. Great to see people combine their passion and romance together with Nice results._
:)"
"Hi all.
I've made another picture of my simple but trustworhty foam cutting cnc machine and simple cuts I can do with it... :)"
I've made another picture of my simple but trustworhty foam cutting cnc machine and simple cuts I can do with it... :)"
"The first "giant" plane is still under construction.
Info for the last (3rd from the top) model can be found on jamesmagos's Thread which he posted.
You can enjoy a video below of the Avra's first flight. It was shot by a friend's mobile, so quality…"
Info for the last (3rd from the top) model can be found on jamesmagos's Thread which he posted.
You can enjoy a video below of the Avra's first flight. It was shot by a friend's mobile, so quality…"
"Two "compilation" pictures will follow of my attempts on building Flying wings (tailless planes). That type of plane is one of my favorites for it's simplicity and pure Fun... :)
Oh yes... my cnc machine has helped me A LOT over the last years to…"
Oh yes... my cnc machine has helped me A LOT over the last years to…"
