About
Activity Feed
"Something is starting to work, just tried jumping/binding between d6 and d7 and the blue light started flashing. So I rushed outside to make sure the gps could see the sky, however within two minutes or so the blue light completely stopped."
"The manual shows how use a bind plug with the shield. I tried binding d6 and d7 on the ardupilot (nothing happened), are those the correct pins for binding? So I take it this will not work correctly until the GPS is in binary mode?"
"I'm trying to get my gps to lock (I have the standard em406) and the lock light will not flash. I have it setup for north east mode, servo is plugged into output 1 (rudder?), power LED is illuminated, and Stat LED is flashing, battery is plugged…"
"I found a "walk around" mode in the debugging section of easystar.h"
"One more Q: where in the config files do I enable "walkabout mode" ?"
"Thank you for your quick responses! I'm going to try this
But how come you guys still list 1.x on the ArduPilot homepage?"
But how come you guys still list 1.x on the ArduPilot homepage?"
"Hi I'm trying to upload the 1.x code onto the latest ardupilot board (328 or something like that) and arduino0017 keeps giving me this error "error: 'reset_PIDs' was not declared in this scope" . I'm trying to put this ardupilot in a car. Could…"
