About

Gender

Male


Location

Bandung


About Me:

Beginner Aeromodelling


Please tell us a bit about your UAV interest

First Person Video with some autopilot


Hometown:

Bandung


Activity Feed

Ferdie Misnadi replied to Ferdie Misnadi's discussion FX-79 Motor Burn Out Using Lipo 4S Battery
"I am using 850 kv brushless motor, propeller 13 x 8, and weight 3,5 kg "
Apr 7, 2016
Ferdie Misnadi posted a discussion
For the first time I tested my FX-79 with 4S Lipo battery, It can fly approximately 45 minutes while RTL with 2 x 5500 mAh. But the second time I tested It, my motor is burn out while RTL.My spec : - 2 x 5500 mAh- FC : Pixhawk- ESC : Phoenix Edge 80…
Apr 7, 2016
Ferdie Misnadi posted a discussion
steadidrone always drop in the middle of the street, between 6-8 minutes .. whether escnya or main motors or what constraints? I am confused is there here that could provide a solution /?Capture steadi.JPG
Dec 28, 2015
Ferdie Misnadi posted a discussion
Hi guys, I have modify my trigger shutter with two cable soldering As this website : http://photoshipone.com/10/sony-nex5n-trigger-modification/But I can't use "Trigger Camera Now" in Mission Planner. I Plug the signal and ground cable.in RC 7. I'm…
Jul 28, 2015
Ferdie Misnadi replied to Ferdie Misnadi's discussion Servo didn't work in Pixhawk
"Im not using the bec for my ESC,  I just upgrade the firmware from ardupilot 2.74 to ardupilot 3.01. But when I use 2.74 the servos are working but when I upgrade to 3.01 It didn't work but the throttle is working."
Apr 17, 2014
Ferdie Misnadi posted a discussion
Hello guysI install my pixhawk in Skywalker X5, when I tested the servos and throttle, throttle work well but the servo didn't work.I use Red Brick 50 Amp for my ESC, Futaba T8J, and 5300 mAh 11,1 V for my battery.Any advice  ?
Apr 17, 2014