Gender
Male
About
About Me:
SUAV designer, builder, flyer
Please tell us a bit about your UAV interest
Trying to sort Mission Planner
Hometown:
New Jersey
Activity Feed
"Eureka! Thanks Patrick - I just inserted your addition to the section in the rtph264pay command - and it now comes up independent of startup order.
Thank you so much; I've been at this on and off for a few weeks and beginning to lose sleep on it.…"
Thank you so much; I've been at this on and off for a few weeks and beginning to lose sleep on it.…"
"Patrick,
Do you mean adding another 'config-interval=1' within the area of the rtph264pay command enclosed by thje exclamation marks?
Can you show me the exact syntax?
Thanks,
Paul"
Do you mean adding another 'config-interval=1' within the area of the rtph264pay command enclosed by thje exclamation marks?
Can you show me the exact syntax?
Thanks,
Paul"
"I found that I can start the stream by manually running the raspivid command from the Pi CLI. It will not work when I set up the raspivid command to start automatically on boot-up with a script that runs from rc.local.
Is there a better or at least…"
Is there a better or at least…"
"Ok, got it work with UDP-based streaming - by accident. I had the HUD up and connected to Mavlink, then manually turned on the video stream at the Pi - then the HUD came up!
Is that the crucial sequence? HUD up first, then video?"
Is that the crucial sequence? HUD up first, then video?"
"Thought I found it: The Pi command should have a "-" in gst-launch-1.0. I fixed that and the Pi output says it is playing the video, but the HUD still remains blank. Sheesh. Here is the HUD cli:"
"Ok, excellent progress. I went back to square one and made a direct point-to-point network between a PC and the Pi. PC can ping Pi and vice-versa. In this configuration I got the TCP-based video to work again. This tells me that either my other…"
"I went back to your original UDP strings:
On the Pi:
raspivid -t 0 -w 1280 -h 720 -fps 30 -b 1700000 -o - | gst-launch1.0 -v fdsrc ! h264parse config-interval=1 ! rtph264pay ! udpsink host = 192.168.1.104 port= 9000
Where the IP address is that…"
On the Pi:
raspivid -t 0 -w 1280 -h 720 -fps 30 -b 1700000 -o - | gst-launch1.0 -v fdsrc ! h264parse config-interval=1 ! rtph264pay ! udpsink host = 192.168.1.104 port= 9000
Where the IP address is that…"
"I tried installing on another Windows 10 PC. I get the test pattern, but still get the: "Could not open the resource for reading." error."
"Ok, please pardon my frustration, but I cannot get it to work at all any more. I can't even get the test pattern to play. I tried removing and re-installing the HUD, I looked and there are no residual files from old gstreamer installs. The HUD…"
"Hi Patrick,
Here is the HUD pipeline string:
tcpclientsrc host=<Pi IP address> port=5000 ! gdpdepay ! rtph264depay ! avdec_h264
Here is the RPi raspivid command:
raspivid -t 0 -h 1080 -w 1920 -fps 30 -b 2000000 -o - | gst-launch-1.0 -v fdsrc !…"
Here is the HUD pipeline string:
tcpclientsrc host=<Pi IP address> port=5000 ! gdpdepay ! rtph264depay ! avdec_h264
Here is the RPi raspivid command:
raspivid -t 0 -h 1080 -w 1920 -fps 30 -b 2000000 -o - | gst-launch-1.0 -v fdsrc !…"
"Hi,
I can no longer get the HUD to show video. I had it working before, but all I did was change the IP address of the Pi from which the video is streaming. I changed the IP address as well in he pipeline field in HUD but I keep getting the "Could…"
I can no longer get the HUD to show video. I had it working before, but all I did was change the IP address of the Pi from which the video is streaming. I changed the IP address as well in he pipeline field in HUD but I keep getting the "Could…"
"Thanks Patrick.
i agree with your approach of displaying the armed and disarmed messages for only a few seconds. In the meantime I will do some reading on Qt QML.
Paul"
i agree with your approach of displaying the armed and disarmed messages for only a few seconds. In the meantime I will do some reading on Qt QML.
Paul"
"How do I add additional information to the stand-alone HUD? I want to see the ARM and DISARM states.
Thanks,
Paul
"
Thanks,
Paul
"
"Wow Ronald, Thanks for the detailed instructions; I will perform them very soon.
In the meantime I am already streaming h264 video from the Pi using raspivid, and can view it on Patrick's stand-alone HUD. Why couldn't I display the same stream in…"
In the meantime I am already streaming h264 video from the Pi using raspivid, and can view it on Patrick's stand-alone HUD. Why couldn't I display the same stream in…"
"Ronald,
Please tell me more - I'm using a Rapsberry Pi with raspivid right now. With what commands or statement do I tell the native Mission Planner HUD to display the streaming video from the Pi?
Thanks,
Paul
"
Please tell me more - I'm using a Rapsberry Pi with raspivid right now. With what commands or statement do I tell the native Mission Planner HUD to display the streaming video from the Pi?
Thanks,
Paul
"
"Can this same video stream be displayed on the HUD that is native to Mission Planner?
There is an option to tell the native HUD to get video from a source, and I've seen folks on the web putting their FPV streams on the native HUD.
I'm not…"
There is an option to tell the native HUD to get video from a source, and I've seen folks on the web putting their FPV streams on the native HUD.
I'm not…"
