Plane 3.7 Steer2Serv Fails to Steer w/ any parameter while moving faster than 1m/s.
Tested all paramaters high/low while running the airframe on the runway @ 1m/s & turning L & R.
Tested all paramaters high/low while in Shop @ Bench. Steer2Serv will no
SUCCESS:
After Diagnostics w/ different verified failing configurations of UBECS, X8R, Pixhawk & RCXEL.
Failure is RCEXEL Ignition Module RPM Connector @ AUX5 on PIxhawk Servo Rail connected.
Passed RCXEL LED on Pixhawk RC9 Passthrough w/ RCXEL RPM
Greetings,
Arduplane 3.4
Definition Stabilize Roll & Yaw:
1. In Stabilize Mode when I Roll the Yaw also Increments to improve the turn.
Definition Inverted:
1. Switch Inverted Reverses the Arduplane Attributes for Roll, Pitch & Yaw allowing normal sti
Read more…greetings,
my suggestion and request is for the option to remove angle_max from stabilize mode.
i have field tested arducopter 2013 & 2014 versions with angle_max in stabilize mode.
greetings,
my suggestion and request is for the option to remove angle_max from stabilize mode.
i have field tested arducopter 2013 & 2014 versions with angle_max in stabilize mode.
PASSED AT RESOLDERING TEENSY DF13 CONNECTORS
Read more…FAA_PETITION = REGISTRATION & IDENTIFICATION OF UAV & COMPASS:
REGISTRATION:
Read more…
- IDENTIFICATION OPTIONS:
- SERIAL NUMBERS REGISTERED & STAMPED IN TO HULLS
- UAV
