"Hi everyone I have an oddity with the Sat icon on my Minimosd and wondered if anyone else is seiing this or may have an idea how to stop it. I recently fitted an APM 2.8 with Neo M8N GPS to my FX-61. Sometimes the Satellite icon shows the Dish sym…"
"I think he is making reference to the Trainer Switch as it is a non latched switch and will return automatically when you let it go. You really do not have to use this switch and as you say on the Taranis you can assign any channel to any switch or…"
"My version does this with the mode switch same as you state by moving it back and forth in one second will change the OSD display to 1, 2 or off. It is settable in the configurator as to how you have it function.
"Hi everyone been using R800 for a while now with great success but have noticed an oddity with the Pitch Symbol. My Pitch and Roll OSD symbols appear at the top right corner of my screen and I have noticed that when I put in the Pitch symbol it put…"
"I am no expert here but is it possible that Trip Distance is not present in the version that you are using and what you are seeing on the screen is a remnant from some other firmware? I use the R800 version linked in this thread and it works just…"
"Yes there is a solution as this is exactly what happened with me, a couple of pages back is my solution. What is happening to you is that even though the CT is saying that the Character Set has updated correctly it has not. Once you correctly upda…"
Hi allAm a little new to APM and when i connected tonight it said Update available. When I do this will I loose all of the settings and work I have done so far in my 3.20 version? It has taken me a while to set this up and i dont want to go through…
"I just found out after two days head banging that with my Sparkfun 3.3 volt FTDI it was not enough to update the chararcter set even with the analogue side powered with 12v. 3.3 volts was enough to be able to read and send the config and panels to…"