Gender
Male
About
Location
Oklahoma City, OK
About Me:
Film Maker, Art Director, Director of Photography
Please tell us a bit about your UAV interest
I want to explore how UAVs can help me tell stories and show people the world from a new and exciting perspective.
Hometown:
Oklahoma City, Ok
Activity Feed
"No, I could never figure it out. I tried a TON of stuff and scoured the internet. I would recommend reinstalling the firmware to the APM, calibrating the ESC and throttle min/max.
I ended up having to get a replacement APM.
Sorry I don't have…"
I ended up having to get a replacement APM.
Sorry I don't have…"
I've set up my quad with an APM 2.6 and everything is working.... except the output channel 2. I can turn the APM on, arm the motors and get them spinning except which ever motor is plugged into channel 2. I've plugged in different motors into…
"@Thomas,
You are right. I figured out the sound is coming from a dongle which is connected the sixth place of what I'm guessing are the aux ports on the side of the board. When I unplug it, the noise obviously stops.
I should probably add that…"
You are right. I figured out the sound is coming from a dongle which is connected the sixth place of what I'm guessing are the aux ports on the side of the board. When I unplug it, the noise obviously stops.
I should probably add that…"
I'm trying to connect my APM 2.5 to the mission planner software. When I plug in the USB the the APM starts up and the A & C lights start flashing, however after a few seconds the board lets out a loud sustained beep and does not end until I remove…
