Our high-endurance development platform, named "Grasshopper" is perfect as a development platform, surveillance drone, or even a light show drone.

It is compatible with all the Micasense cameras and the Parrot Sequoia and has a flight time of up to 1hr with 200g of payload.

As optional we offer our satellite telemetry system for BVLOS flights.

The base version of the drone has a 580mm wheelbase and a 160.000 Mah battery.

Pricing starts at 1600€.

For more information, please get in touch with us at heimdallai@gmail.com

The ultimate solution for remote sensing and IoT monitoring applications, this module can be easily used on unmanned systems for research, meteorological applications, wildfire monitoring systems, and security applications.

This Plug and Play module directly connects to the TELEM1/2 port of your Pixhawk system to provide satellite telemetry, easy to set up, and to use with QGC or other ground station software.

This system integrates an Iridium 9603 module to transmit telemetry information wherever on the planet.

Starts at 699€

For more details: heimdallai@gmail.com

The Grasshopper NDVI is the newest in our line of simple-to-use survey cameras. Every Grasshopper NDVI camera allows the connection to an external USB GPS receiver to automatically geo-tag each captured image. Its 8MP sensor and sharp non-fisheye lens allow you to capture aerial media easily. It captures photos on the default timer trigger or can be sent a PWM signal through the HDMI port (see below). If you supply power to the USB port it will power on the camera automatically. Sized similar to a GoPro® Hero these small survey cameras can be attached to your aerial drone platform using our various mounts.

This Red+NIR (NDVI) model sees Near Infrared 850nm and Red 660nm light. The images from this camera are commonly calibrated into an index image and then a colored lut is applied to show contrast between healthy and poor health vegetation.

Starts at 239€

Check it out

For inquiries: heimdallai@gmail.com

Hello Everyone!

Long-range operations are becoming common these days and 4G networks are often not available in remote areas.

The Heimdall companion computer solves these issues by using low bandwidth satellite telemetry, for cheap communications without range limits.

We optimized it for the MAVLINK protocol and we are able to provide it as a plug-and-play solution for many controllers.

Heimdall uses the Iridium satellite network to send UAV telemetry and object detection data to your ground station, to do that we had to develop a custom ground software, compatible with most flight controllers.

For more information please write to heimdallai@gmail.com

or visit our site heimdallai.com