About Me:
Mfg engineer.
About
Please tell us a bit about your UAV interest
I’m working on a crowdsourcing DARPA-SSC Atlantic project (http://www.uavforge.net/). My tasks are 1) power distribution and 2) flight plan add-in to simulate “extreme” weather impairments, such as winds, rain or snow. Everything has to be open source.
Hometown:
PA
Activity Feed
"Mike, I’m getting the same problem.
On the first platform (RTF 940g) after calibrating the 4 ESCs: prop1=3360RPM, prop2=3560RPM, prop3=3420, prop4=3870.
On the second platform (RTF 883g) after calibrating the 4 ESCs: prop1=3360, prop2=5730,…"
On the first platform (RTF 940g) after calibrating the 4 ESCs: prop1=3360RPM, prop2=3560RPM, prop3=3420, prop4=3870.
On the second platform (RTF 883g) after calibrating the 4 ESCs: prop1=3360, prop2=5730,…"
"Greetings Michael,
Please refer to Chris’s APM Roadmap blog for the introduction:
http://diydrones.com/group/apmusergroup/forum/topics/apm-roadmap
There could be an opportunity for having a community college in Pennsylvania look into writing some…"
Please refer to Chris’s APM Roadmap blog for the introduction:
http://diydrones.com/group/apmusergroup/forum/topics/apm-roadmap
There could be an opportunity for having a community college in Pennsylvania look into writing some…"
"Greetings,
As you may be aware, Darpa and the Space and Naval Warfare Systems Center Atlantic have just started a collaborative initiative to design, build and manufacture UAV systems (http://www.uavforge.net/). This was an opportunity for me to…"
As you may be aware, Darpa and the Space and Naval Warfare Systems Center Atlantic have just started a collaborative initiative to design, build and manufacture UAV systems (http://www.uavforge.net/). This was an opportunity for me to…"
