Gender
Male
About
Location
Melbourne, Victoria
About Me:
I'm a 27 year old Engineer from Melbourne, Australia.
Please tell us a bit about your UAV interest
New to RC, but from a robotics/embedded systems background. I'm looking to have some fun building and flying drones
Hometown:
Melbourne
Activity Feed
"Hi,
XCP on CAN is interesting. The measurement bandwidth is quite limited compared to proper XCP on ethernet, but it should be sufficient to measure some simple info depending on how heavily loaded the CAN bus is already.
There are a few problems…"
XCP on CAN is interesting. The measurement bandwidth is quite limited compared to proper XCP on ethernet, but it should be sufficient to measure some simple info depending on how heavily loaded the CAN bus is already.
There are a few problems…"
"You're correct that there is some limited self correction functionality, but the sensor has no way of knowing where it is and where it's pointed. It needs to be told these things via diagnostic commands which are either executed at the end of the…"
"Hi,
There is no gyro or accelerometer on the LRR3 or any automotive radar that I know about, they typically receive data on the vehicle motion from the ESC system.
The alightment error is because the system needs to be aligned to very high…"
There is no gyro or accelerometer on the LRR3 or any automotive radar that I know about, they typically receive data on the vehicle motion from the ESC system.
The alightment error is because the system needs to be aligned to very high…"
"Hi Zach,
This is my first post here, but this question was so far up my alley I had to answer. I'm an automotive systems engineer working on active safety systems (not ACC) for a large automotive supplier.
To get the unit to communicate your best…"
This is my first post here, but this question was so far up my alley I had to answer. I'm an automotive systems engineer working on active safety systems (not ACC) for a large automotive supplier.
To get the unit to communicate your best…"
