I'm currently using a 3 cell 5000mah LiPo batter. The battery connects to the 3DR Power Module, which connects to a wire harness power distribution. This PD connects to each of the ESCs which connect to the motors.
This problem wasn't happening before
Read more…I read that an APM power module can accept up to 18 volts and read up to 90 amps.
The battery I'm using is a LiPo 3-Cell Battery of 11.1 volts but 5000mah and 20-30C. Does this mean its a 100-amp battery? I tried connecting to the Power Module and my
Read more…I am currently trying to add ultrasonic detection to my flight controller. To do this, I was told I needed an Arduino because APM doesn't have enough processing power to handle sonar and flight control.
The way I understand it is that you connect the
I have an APM 2.6. I was told that I need to install version 3.2.1 of the firmware of Mission Planner into it so I did. The firmware downloaded successfully and I am able to connect with the COM port, however when I see the flight data, the readings
Read more…