About

Gender

Male


Location

Victoria


About Me:

Retired Comms engineer with a Quad flying & amateur radio hobbies.


Please tell us a bit about your UAV interest

Started with a DJI Phantom, then built two of my own Quads using DJI controllers and an assortment of motors, Esc's and propellors. Bought a Nova, flew it 4 times and now it does not want to arm the motors


Hometown:

Donvale


Activity Feed

Joseph Bonavia replied to Joseph Bonavia's discussion Quanum Nova fails to arm
"I thought that something was amiss there as it was far too long to wait for it to arm.
Glad you discovered the issue and now it is resolved.
But as you said, best to lock in the satellites before you take off just in case you loose it or it goes out…"
Nov 9, 2014
Joseph Bonavia replied to Joseph Bonavia's discussion Quanum Nova fails to arm
"That is quite a long time to arm the bird. I do not have this issue with the replacement unit that I received. However I have to add a point that I have recently experience and have been able to repeat...........
My computer uses Wifi for…"
Oct 24, 2014
Joseph Bonavia replied to Joseph Bonavia's discussion Quanum Nova fails to arm
"Hi Rich
Thought I would give you a heads up on what actually was wrong with the Quanum Nova...... I actually tested the TX transmission using my spectrum analyser and although it starts, it would not continue transmission in frequency hopping mode.…"
Oct 8, 2014
Joseph Bonavia replied to Joseph Bonavia's discussion Quanum Nova fails to arm
"Oh mate, that is an excellent choice.
Certainly you could not have asked for more.
Fantastic job - Congratulations"
Aug 16, 2014
Joseph Bonavia replied to Joseph Bonavia's discussion Quanum Nova fails to arm
"No home run for me Rich, I have tried everything I could of today.
And by the way, mine is also stuck in RTL mode but no matter how many times I switched the transmitter on and off, it is not return to standard mode.
I just thought of something…"
Aug 13, 2014
Joseph Bonavia replied to Joseph Bonavia's discussion Quanum Nova fails to arm
"Mmmm.....don't like the sounds of that. I am going to give it a try anyway and at the same time I am going to investigate further around the RTL - RTH mode using MP. I will let you know how I go.
BTW  you are right about the plastic being weak and…"
Aug 13, 2014
Joseph Bonavia replied to Joseph Bonavia's discussion Quanum Nova fails to arm
"I wonder how it decided to change on its own. I had never connected to Mission Planner till the copter failed to arm. So I am sure that MP never caused this issue. I can also comment that using my spectrum analyzer I noticed a huge difference…"
Aug 13, 2014
Joseph Bonavia replied to Joseph Bonavia's discussion Quanum Nova fails to arm
"Thanks for the link, it is a long video but quite informative.
I have tried again to see if the unit will arm but like yours it just does not fails to do so.
I have actually received a reply from HK today and I think this is a wide spread issue.…"
Aug 13, 2014
Joseph Bonavia replied to Joseph Bonavia's discussion Quanum Nova fails to arm
"Yes it connects as follows: Black to 1, Red to 2 and white to 3. The picture tells a 1000 stories...DSC02849.jpg"
Aug 13, 2014
Joseph Bonavia replied to Joseph Bonavia's discussion Quanum Nova fails to arm
"Hi Rich, Happy to add the text I discovered on binding the Nova. None the less, it is still a little confusing as it seems that the Rudder's bottom pin is one bind position but bind to which other pin??
Anyway, here it is:
Hi there just adding a…"
Aug 13, 2014
Joseph Bonavia posted a discussion
 I have only managed to fly my new Quanum Nova 5 times. Now it has fails to arm the motors. I have checked both the transmitter & receiver and have noticed that the receiver stops flashing red once the TX is switched on. Have read a few blogs and…
Aug 11, 2014