3d fabric platform at indiegogo
Hi.
I've just fund this impressive proyect. 3D platform all in 1, additive printing, SLA printing, milling, scanning...
https://www.indiegogo.com/projects/fabtotum-prism/x/10190040#/story
Juan Carlos Hdez's Discussions (10)
Sort by
Small high resolution wide angle lens
Simply awesome:
English:
http://www.jacobsschool.ucsd.edu/news/news_releases/release.sfe?id=1418
En español:
http://es.engadget.com/2013/09/27/objetivo-angular-miniatura-ucsd/
The left one: Canon objective (yes, Canon), and the right one: new developed l
Read more…Fence Min Alt feature.
Hi all.
When we've set this the copter can't drop below this min alt.
This may be helpful to learn, be less stressed when we want to test options. when doing FPV, we can be sure that we will not touch the ground. Min alt fence doesn't depend on GPS fix
Read more…External compass issue.
Hi all.
I have a fly away problem in loiter, AC 3.0.1, and I've seen that there is a misleading issue with my external compass HMC5883 (3dr robotics). The arrow silkscreened shows an incorrect direction.
I don't know if that corrects my fly away proble
Read more…Arducopter 3.0 RC3 loiter isue
This is my first test with my new DIY 1000mm octo +. ESC's turnigy plush 40A with simonk firm. Motors
HL W48-30 420KV from himodel. Battery turnigy 5000mah 5s.APM 1 2560mb and GPS ublox LEA 6H
I've tried with standard PID's.
In stabilize mode and a bit
Read more…The Pelicano, one of the first rotary-wing UAV
Indra's new UAV is called the Pelicano. It has a maximum takeoff weight of about 329 pounds, a cruise speed of about 56 miles per hour and a flight endurance of 4-6 hours. It can auto-land over a ship at poorest conditions.
When can we see an arducopt
Read more…X8 octocopter
Hi.
I am planning to build a DIY octocopter heavy lifter, in order to lift a canon 5d. I thought to do a X quad configuration, dual motor on each arm, the same style as the Y6 but, as it where a X8, thus reducing the hardware and weight. The firmware
Read more…sensors in the arms?
newbie question. (Do not know if anyone has shown this idea)Ignoring the problem of vibration, would be useful to have two accelerometers in both arms (x and y)? Would it help to detect more incipient movements?
Read more…