About

Gender

Male


Location

Aachen


About Me:

UAV enthusiast from Aachen, Germany


Please tell us a bit about your UAV interest

Quads (60cm and 17cm) and planes (currently Bixler and Robbe Charter).


Hometown:

Aachen


Activity Feed

KaiK commented on Jani Hirvinen's blog post Adding more features to IOBoard
"Which firmware version are you using. Latest version 0.5 doesnt act like described by you (which correspondences with the sources in FrSky.ino file)"
Dec 25, 2013
KaiK commented on Jani Hirvinen's blog post Adding more features to IOBoard
"I found the latest sources to be here:https://github.com/jdrones/jD-IOBoard/
You can find the payload creation for FrSky telemetry here: https://github.com/jdrones/jD-IOBoard/blob/master/jD_IOBoard_MAVLin...

For RPM it seems to be static values for…"
Dec 24, 2013
KaiK commented on Jani Hirvinen's blog post Adding more features to IOBoard
"I am not shure if the latest sources are available. I used the hex file to flash device and saw old Arduino sources (~1 year old) somewhen."
Dec 23, 2013
KaiK commented on Jani Hirvinen's blog post Adding more features to IOBoard
"I have it (v0.5) with a Taranis. I dont think that there is much difference between OpenTX (e.g. on 9X or 9XR) and Taranis.
In fact the problem is, that there seems to be no latest documentation of the values transmitted (see my post above).

Kai"
Dec 23, 2013
KaiK commented on Jani Hirvinen's blog post Adding more features to IOBoard
"Hi guys,
very nice job. It seems to work here in general as I am receiving data on my Taranis RX.
I have some difficulties interpreting the data. Is there somewhere a latest, comprehensive overview of the data sent by the IOBoard? (I saw the short…"
Dec 19, 2013