"I try putting in +25 and write it. I come back and it won't save anything higher than +10.
Never mind. Wrote it and then another parameter and it decided to save it."

"The YAW_TRIM definitely helps but I can't change the parameter to be above +10. Is there a way to change this in Mission Planner?"

"My tracker is calibrated correctly and points almost exactly where the red line is pointing. The problem comes once I pair with arduplane. It automatically offsets about 45 degrees to the left. I need the tracker to be pointing exactly at the plane.…"

"I believe I am having a parameter issue and cannot get to the bottom of it. I am running arduplane on a computer and sending the data through radio to a Pixhawk that controls my antenna tracker. Immediately after pairing the plane and antenna…"

"I have been working on the antenna tracking firmware version 0.7.3 for my senior design project. I can get a HITL working with a simulated plane and the antenna following it properly. But I can not get the antenna current heading to align with the…"