Gender
Male
About
Location
Saltvik
About Me:
DIY newbie
Please tell us a bit about your UAV interest
Got interested in building an own UAV after finding the ArduPilot project via Arduino.
Hometown:
Saltvik
Activity Feed
"Here are a few pics of the broken IMU and missing dipswitch. I had a friend help me solder the wires in instead of the dipswitch. He soldered them in allright but seems like he did it in "reversed" mode so that now all dipswitches are on by default…"
"Got some good advice on the chat from Darren, thanks Darren.
The file that needs to be hacked is the control_modes.pde file.
The dipswitch settings are controlled by the following lines:
mix_mode = (PINL & 128) ? 0 : 1;
if (mix_mode == 0) {…"
The file that needs to be hacked is the control_modes.pde file.
The dipswitch settings are controlled by the following lines:
mix_mode = (PINL & 128) ? 0 : 1;
if (mix_mode == 0) {…"
Hi,I had an "accident" with my Ardupilot mega which resulted in the dipswitch getting lost. I have now resoldered the wires so that the dipswitches show the following configuration: test] dipswitchesHit Enter to exit.Mix:elevons rev elev:-1, rev…
"Finally decided on the EasyStar with brushless motors. Here is my setup:
Easystar
- HD Pro 2835-10 890kv motor
- HD Pro 20A ESC
- 3S 2200mAh LiPo
- HD1900 micro servos for elevator and rudder
- Ailerons planned, but not implemented yet. Ordered a…"
Easystar
- HD Pro 2835-10 890kv motor
- HD Pro 20A ESC
- 3S 2200mAh LiPo
- HD1900 micro servos for elevator and rudder
- Ailerons planned, but not implemented yet. Ordered a…"
Hello,I'm a UAV newbie and I am investigating the myriads of possibilities in building a UAV platform. I have chosen the ArduPilot mega + IMU as my autopilot platfrom and all is good with that. The next thing is to figure out the groundstation…
"Hello,
has anyone modded Hitec Aurora 9(Spectra 2.4Ghz) module/transmitter with this? I'm just curious about how to connect the antenna cable, since the HItec modules have no U.FL connectors visible...probably inside the module case but has anyone…"
has anyone modded Hitec Aurora 9(Spectra 2.4Ghz) module/transmitter with this? I'm just curious about how to connect the antenna cable, since the HItec modules have no U.FL connectors visible...probably inside the module case but has anyone…"
"Hello,
mighty interesting project! :) I'm trying to do the same thing and have a long-range signal between my ardupilot and my UAV, and was considering Xbee 868 modules but due to some problems with the duty cycle I started searching for other…"
mighty interesting project! :) I'm trying to do the same thing and have a long-range signal between my ardupilot and my UAV, and was considering Xbee 868 modules but due to some problems with the duty cycle I started searching for other…"
"Hey, thanks for the suggestion. Saw some other threads for "Best UAV platform" where the Skywalker was mentioned: http://www.fpvflying.com/products/Skywalker-platform-for-UAV-FPV.html
I'm torn between EasyStar, Twinstar II, Skywalker or some…"
I'm torn between EasyStar, Twinstar II, Skywalker or some…"
