Gender
Male
About
Location
JOHANNESBURG
About Me:
AERONAUTICAL ENGINEER
Please tell us a bit about your UAV interest
QUADROTOR APPLICATIONS, NEURAL NETWORKS, BUILT IN INTELLIGENCE, NATIONAL INSTRUMENTS
Hometown:
JOHANNESBURG
Activity Feed
Hi AllHas anyone done a system identification on their quadcopter and established the effects of the gains on their setup? I would like to pursue this but getting data off my quad.
"Hi Tobin
Are you done with the boards? I am thinking of doing the same. Unless you have some already. :)
If you have none available do you have a list of all the components to be populated?
Will be greatly appreciated.
Regards
Milan"
Are you done with the boards? I am thinking of doing the same. Unless you have some already. :)
If you have none available do you have a list of all the components to be populated?
Will be greatly appreciated.
Regards
Milan"
"Hi Chris, Apologies in advance, I was unsure where to place this comment but any ideas why a hold has been placed on the shipment of pixhawk to countries outside Canada/America? I would like to purchase a pixhawk and it is quite frustrating. "
"20Ah batteries=how many units?
Great work, pixhawk seems to be a great success!"
Great work, pixhawk seems to be a great success!"
"Hi
I actutally done my MSC on the ideal motor propeller combination. I derived a test rig using a cantilever beam and wrote an algoirthm fusing all the data. The problem with this setup is the rigid RC timer blades. I had the DJI ones before. "
I actutally done my MSC on the ideal motor propeller combination. I derived a test rig using a cantilever beam and wrote an algoirthm fusing all the data. The problem with this setup is the rigid RC timer blades. I had the DJI ones before. "
"Yes I am using that exact combo. Good question, its a power distribution box. Just to keep everything neat and tidy.
"
"
Hi AllAfter much debate regarding the arm angle and position of the ESC's I finally manned up, completed the CAD and assembled the Quadcopter. I learned quite alot in terms of 3dprinting and flight dynamics of the craft. In addition I had also…
2014-06-19 11.14.23
-
MILAN BEHARIE Printed parts and RCTIMER equipment, ESC on the arms
"Hi Guys
Purchased the RC timer ESC's: Did some labeling below:
Now to build them into my cool design.....:)"
Purchased the RC timer ESC's: Did some labeling below:
Now to build them into my cool design.....:)"
"Small update on S1000:
Each frame arm is designed with an 8° inversion and a 3° inclination, making the aircraft more stable when rolling and pitching yet more flexible when rotating.
date:"
Each frame arm is designed with an 8° inversion and a 3° inclination, making the aircraft more stable when rolling and pitching yet more flexible when rotating.
date:"
"Anyone have feedback on Paras claim?"
"I figured Fx sin (theta) is a waste of a thrust vector. :)"
"Hi
Thanks for the reply regarding the ESC wire looms, I figure i would cut one up at 2OUSD :).
I plan to use these specific ESCs for a quad im building since these save space and mass.
Regarding the 24 pole config, RCTIMER specify 4114-350KV in…"
Thanks for the reply regarding the ESC wire looms, I figure i would cut one up at 2OUSD :).
I plan to use these specific ESCs for a quad im building since these save space and mass.
Regarding the 24 pole config, RCTIMER specify 4114-350KV in…"
"Hi Micheal, I would like to become more involved in this field it interests me. Regarding algae blooms do you use NVDI? Also is the monitoring of these purely for the benchmarking of treatments? Also 40 acres is 0.2km^2 and this entails whats kind…"
"Hi
What is this in aid of? Personal interest or is it a future business venture?"
What is this in aid of? Personal interest or is it a future business venture?"
"What are the important milestones? Endurance, speed, agility?"
