Gender
Male
About
Location
Porto Alegre
About Me:
I'm CEO of Aurora Imagens (www.auroraimagens.com.br), a company specialized in low altitude aerial photography. We build our own plataforms for specific needs as industrial inspection, mapping/surveying and advertising/cinema.
Please tell us a bit about your UAV interest
Rotary wing and fixed wing.
Hometown:
São Paulo
Activity Feed
"Pictures of the build:
IMG_20151202_130337872_HDR.jpgIMG_20151207_183130334.jpgIMG_20151127_181555858.jpg"
IMG_20151202_130337872_HDR.jpgIMG_20151207_183130334.jpgIMG_20151127_181555858.jpg"
"I sent an e-mail to the manufacturer of the C25 quick release system, asking about the optimum position for installing the booms at center frame. Below is his response. I thought it would be interesting to share for whom may be following the build.…"
"Starting the build. Put main parts on scale to have an idea of total weight before assembly.IMG_20151125_104221824.jpgIMG_20151125_104625028.jpgIMG_20151125_105125903.jpg"
"Before starting the assembly of copter I did some further tests with the boom mechanism to be sure (at least try to be sure) it will not fail on flight. This test was focused more on the joint points. Sorry it was a bit long after all.
Joint…"
Joint…"
"I have been researching for quick release systems for a long time, and had quite a few issues with some makes I got at the past. Normally the joints are not deep enough or show some play after a few flights, which can be very scary. I ended up…"
The main objective of this project is to build a dual purpose multirotor, able to fly heavy lift payloads for videography and lightweight cameras for aerial mapping.We want to be able to fly different missions, with minimal part changes. To achieve…
"Ryan, this is a great blog. Congratulations for your skills. Looking forward to see your flight details. Thanks! "
Hi,I had a transmitter attached to video out, and something went wrong because I lost video out. Opened the camera (GoPro Hero) and found out a smoked component (as you can see on the pictures). Does anyone know where I can find a list of components…
"We did some tests inside a boiler, you can take a look at this link: https://www.youtube.com/watch?v=o4PhJlqI3DY
We used a canon flash unit in order to get enough light, set the camera on autofocus. The result was ok but as you mentioned, we also fly…"
We used a canon flash unit in order to get enough light, set the camera on autofocus. The result was ok but as you mentioned, we also fly…"
"Hello Mike,
I wonder if your project went ahead, I'm starting a project for the same intention, boiler inspections. Researching for possible solutions.
Regards,
Marcelo"
I wonder if your project went ahead, I'm starting a project for the same intention, boiler inspections. Researching for possible solutions.
Regards,
Marcelo"
